You are viewing outdated content for BUG. If you have a BUG Y.T. edition or 2.0 series device, please visit our updated wiki: http://wiki.buglabs.net

From BUG Wiki

Linux and MacOS X

1. Open a terminal window.
2. At the prompt type ping 10.10.10.10
3. The results will be similar to the below example:

Bringing it all together: Eclipse SDK

1. After verifying that you can ping your BUG, if you haven't installed the Eclipse & Dragonfly SDKs visit our SDK Install Guide Wiki page.
2. After installation, launch Eclipse and open the Dragonfly perspective.
3. In the "My BUGs" panel, the following IP Address 10.10.10.10 is displayed.

Windows Vista

1. If you're using a Vista-style Start menu, click on the Windows logo in the bottom right corner.
2. Select Run.
3. In the Open form field type "cmd".
4. Select OK.
5. In the command window, type ping 10.10.10.10 and using the keyboard, select Enter.
6. The result will show a low ping time, around 1 ms.

Windows XP

1. Go to Start > Run
2. Type cmd.
3. Select the OK button.






4. In the command window, type ping 10.10.10.10 and using the keyboard, select Enter.
5. The results will be similar to the below example: